300W - 12" Processed Active Sub-woofer (single) · Vented bandpass active subwoofer with 320 mm driver · Enclosure in 18 mm birch plywood with internal reinforcement and scratch-resistant finish,ergonomically placed carry handles, integral speaker socket for satellite speakers · High 123dB SPL thanks to the special loading design that serves to increase efficiency with significant reduction of distortion at high volume · Reduced size in relation to power output and extension of frequency response (45Hz @ -6dB) · The ideal companion for loudspeakers in the JOLLY5 and JOLLY8 series to strengthen bass frequencies and extend the response range, resulting in total increase of SPL · extend the response range, resulting in total increase of SPL · Custom 250 mm woofer with 51 mm high linear excursion coil · Built-in 300Wrms MOS-FET amplifier · ADAP® (Advanced Dynamic Active Protection) designed to limit amplifier saturation and speaker excursion, guaranteeing complete reliability even in extreme conditions · Active 24dB filter with subsonic filter and 12db filtered output for satellite speakers · Control panel with: combo inputs (jack - XLR) Left and Right inputs, XLR Link, XLR filtered output for satellites, volume control, ground lift switch, 0° - 180° phase reversal switching Specifications:
Configuration
way
1 Vented Bandpass
Built-in amplifier
W rms
300
Frequency response
@-6dB
40Hz-120Hz
Low frequency woofer
inch
1x12" - 2,5" Ø coil
High frequency driver
…..
Sensitivity (@1W/1m)
dB
101
Maximum SPL
126
Dispersion
H x V
Input impedance
kOhm
22
Crossover frequency
kHz
active 120Hz
Input connectors
combo / XLR M
Power cord
m
5
Net dimensions (WxHxD)
mm
410x550x590
Net weight
kg
35
Shipping dimensions (WxHxD)
430x580x610
Shipping weight
38
« Back