Matrix Input Assignment
No longer does your device need to be married to a particular Channel. The 8 input sources are freely assignable to any channel or even multiple channels.
8 Line / 3 Phono, switchable
4 Smooth 60mm VCA Channel Faders w/contour adjust
Flex Fader 45mm VCA Cross Fader w/contour adjust
The tension on this crossfader can be adjusted freely.
Independent Channel PFL Meters
All input levels can be pre-adjusted in advance to match the gain levels, insuring a smooth transition between fades.
Independent 3-Band EQ (High-Mid-Low) w/full kills
Independent CUE system (all channels)
Booth Output Assign Selector
Pre-monitor any channel including Master through the booth output in the same manner as you would with your headphones, with volume control!
External Send/Return Control
- Multi Channel Assignable
- Effect On/Off
- Effect Pre & Post switch
- Effect Dry/Wet Knob
- Effect Cueing
Independent Channel A-B Post Switch (crossfader)
Powerful & Clean Headphone Output
Fader Start (all channels)
Cross Fader and Channel Fader-Start Trigger is compatible with all Denon DJ CD/MP3/Media players.
12” Tabletop Style Mixer
2 Independent Mics w/3-band EQ
- Main Mic (Neutrik combo terminal)
- Aux Mix (TRS 1/4” terminal)
Mic Ducking Attenuation w/level control
Split / Cue Headphone Monitor w/PFL Metering
Other Features
- Master Output -10dB Attenuation Switch
- Master Output Stereo/Mono Switch
- Master Output – Balanced XLR & RCA/Unbalanced
- Record Out – RCA/Unbalanced
- Booth Output – Balanced TRS 1/4”
- Power Switch Guard on Top Panel
- Gold Plated connectors
- Detachable power cord
GENERAL
Dimensions: (without feet) 320 (W) x 357 (H) x 92.5 (D) mm
12.0 (W) x 14 (H) x 6.9 (D) 3.6 inch
Weight 6.2 kg, 13.5 lbs.
Power supply 230 V AC, 50 Hz
Power consumption 17 W
AUDIO
Input Level & Impedance:
8-Line -14 dBV (200 mV) 50k kΩ/kohms
3-Phono -50 dBV (3.0 mV) 50 kΩ/kohms
Effect (Return) -14 dBV (200 mV) 50 kΩ/kohms
Main Mic -54 dBV (2.0 mV) 10 kΩ/kohms
Output level & Impedance:
Balanced 4 dBm (1.23 V) 600Ω/ohms
Unbalanced 0 dBV (1.0V) 1 kΩ/kohms
Booth/Zone (Balanced) dBm (1.23 V) 600 Ω/ohms load
Rec (RCA) -10 dBV (316 mV) 1 kΩ/kohms
Effect (Send) -14 dBV (200 mV) 1 kΩ/kohms
Subwoofer/Lighiting 2 dBm (975 mV) 600Ω/ohms
Headphone 0 dBV (1.0 V) 32 Ω/ohms
Frequency Response:
Line 20 to 20 kHz ±2 dB
Phono 0 to 20 kHz RIAA ±2 dB
Mic 20 to 20 kHz ±2 dB
Signal to Noise ratio:
Line 82 dB (0 dBm, 1 kHz, EQ fl at)
Phono 5dB (0 dBm, 1 kHz, EQ fl at)
Main Mic 65 dB (0 dBm, 1 kHz, EQ fl at)
Total harmonic distortion rate:
Line Below 0.05%
Phono Below 0.05%
Cross talk Over 70 dB
Channel equalizer:
Hi +10 dB, -35 dB (16 kHz)
Mid +10 dB, -35 dB (1 kHz)
Low +6 dB, -35 dB (60 Hz)
Microphone equalizer:
Hi +12 dB, -12 dB (10 kHz)
Mid +12 dB, -12 dB (1 kHz)
Low +12 dB, -12 dB (100 Hz)
